Do it yourself Livingston Pool Safety Installation Versus Professional Installation

Add Pleasure In your life With A Clean Pool:

Enormous integer of populace possesses swimming pools. A swimming pool provides pleasurable and excitement however, it can also be dangerous. It only takes several seconds for a kid to drown. To stop this from taking place, you should make use of a swimming pool cover. In addition to protecting your swimming pool, covers have other good uses as well. If you buy a solar powered pool cover, you will keep your water warm from the heat of the sun as well as keep your pool. If you wish for the finest in defense, you can use hard top swimming pool covers that are very brawny. A swimming pool is a wonderful thing to have in your yard, although you must remember that drowning is one of the most frequent deaths with children. If drowning takes place in a swimming pool, in the majority of cases the cause is the lack of regulation. If you possess a pool, you plainly must have security equipment approximately all the time.

Save Your children By using Pool Covers:

In toting up to cleanliness, a different factor that needs to be taken into deliberation, when looking to buy a pool cover is safety. If you are a parent or if you subsist in environs that are full of kids, you may want to keep safety in psyche when buying a pool cover. In addition to cheap, traditional pool covers, did you know that you can pay for safety pool covers? You can. There are actually pool covers that are strong enough to clasp the weight of an adult! A strong and durable pool cover is the perfect way to make sure that your pool is safe for children to be in the region. Pool Safety for Kids & Families The American Academy of Pediatrics recommends that all families with children under the age of five install a 4-foot-tall (or more) pool fence or guard (many states, such as Florida, already have pool fence or pool barrier laws in place) around all sides of the pool or that they hold off on pool building until the children are over age five.

No issue what category of pool you have, you’ll need to perform regular maintenance on it. Potentially, the biggest charge you’ll face is observance your pool clean. Unless you want to squander hours of time scrubbing your pool as a replacement of swimming in it, you should take a look at automatic pool cleaners. It may be possible to trim down your pool supply costs if you can procure your swimming pool supplies wholesale. However, you should make sure that the quality isn’t compromised, especially when it comes to your pool chemical supplies.

As the total you spend for pool supplies adds up, you may begin to wonder what made your pool such a great investment. It’s factual that swimming pools do have ongoing maintenance costs. But as long as you have the pool supplies you need and don’t let pool problems get ahead of you, then you should be able to spend nearly everyone of your time relaxing and enjoying your speculation.

Child Pool Safety – 16 Tips for Keeping Your children Safe Around Pools

While swimming pools provide a great deal of fun and entertainment for families, friends and social gatherings, one must always remember that without the proper safety precautions in place, pools are also a safety hazard, especially for infants and children under the age of five.

The U. S. Consumer Product Safety Commission estimates that each year, 350 children under five years of age drown in swimming pools, with many of these instances occurring in residential pools. Additionally, an estimated 2, 600 children under the age of five are treated each year in hospital emergency rooms due to submersion-related injuries. Sadly, these submersion incidents sometimes result in permanent brain damage and death. Drowning is a leading cause of death in children under five, and certain precautionary steps should be taken in order to avoid submersion accidents and to improve the level of safety in the home.

There is no substitute for adequate supervision when child safety is of concern, and supervision combined with other important layers of protection, such as pool covers, barriers, fences, and pool alarms, ensure that all bases are covered and that your child remains safe from submersion incidents and possible drowning.

Pool Safety Precautions and Drowning Prevention Tips

1. Never leave a child unsupervised in or near a pool for any reason. Even the few moments it takes to answer a phone call, or to answer a door bell is ample time for accidents and drowning to occur. Keep in mind that child drowning is quick and silent. There is no splashing to warn you of the danger your child is in. If you must leave the pool area, take your child with you, and be sure to check that the gate to the pool has been securely latched on your way out.

2. Do not rely solely on flotation devices such as inflatable arm bands and inner tubes to prevent drowning.

3. One of the best ways to ensure child safety around pools is to install a safety pool cover that completely envelops your pool, and locks into place. Safety pool covers can be used when the pool is not being occupied for a maximum level of safety. Be sure to remove the cover completely before use, to prevent a child from drowning under the cover.

4. During the winter season, keep your pool covered with a winter pool cover either made of finely woven mesh or one that has a drain in the center, which allows for rain water to sift through. Remember that drowning can occur in only inches of water.

5. During social gatherings appoint an adult as a designated pool monitor to protect young children from accidents. This precaution is essential as when adults become preoccupied, children are most at risk. Seeing adults participate in good safety behavior is a good example to set for young children.

6. Install fences or barriers around the perimeter of your pool. Fences should be at least 4 feet tall, and should be self-closing and self-latching. Latches should be out of reach of young children. Maintain these fences, with close attention paid to the gates, as gates that have not been properly maintained often do not always close properly. Be sure to keep large objects such as tables, chairs, ladders, and tricycles away from pool fences. These would allow a youngster access to the pool by climbing over the fence.

7. If your pool, spa, or hot tub is indoors, lock the door to the room to keep out children and unauthorized swimmers from accessing your pool supplies or spa supplies.

8. Install alarms on doors leading to the pool, especially if one side of your house forms the barrier to the pool. Alarms can be installed on doors leading to the pool to detect when they have been opened unexpectedly.

9. Learn cardiopulmonary resuscitation (CPR) and be sure that other guardians, such as babysitters and grandparents know it as well. CPR can be a lifesaver in an emergency (for the nearest CPR class, contact your local Fire Department, Red Cross, or hospital).

10. Regarding above ground pools, ladders and steps should be secured and locked to the side of the pool during pool use, and removed and stored when the pool is not in use.

11. Do not allow a young child in a pool without the supervision of an adult. Young children should never be considered water safe despite their swimming ability or past experience.

12. Don’t leave toys in or around a pool. Toys will entice children into the pool area.

13. Never swim during a storm or if you see lightening, or hear thunder.

14. Be sure to keep a phone and emergency numbers near the pool and store rescue equipment near the pool.

15. Establish and maintain poolside rules such as no running, no pushing, no rough-housing, no dunking, and no diving.

16. If your child goes missing, always check the pool first, as every second counts in preventing brain damage or death when pool accidents occur.

As always, preventing an emergency is the best precaution. Remember that child drowning can occur in as little as a few seconds. Share these tips with family and friends to keep water play safe and fun.

Choosing the right Automatic Pool Cleaner for a New Backyard Swimming pool

Buying an automatic pool cleaner for a new backyard swimming pool is a major investment that can cost in the range of $400 to $1500. This can be one of the larger buying decisions for your pool and deserves serious consideration. Making the correct choice the first time can save hundreds, if not thousands of dollars in pool cleaner repair or replacement costs and other related expenses over the functional lifetime of your pool.

The first step in choosing correctly is to understand what type of pool cleaner is right for your swimming pool environment. There are two main type of cleaners used for the typical residential pool, pressure cleaners and suction cleaners.

Suction Pool Cleaners – acts like a vacuum that is propelled by the suction created by the main pump. It vacuums dirt and debris from the bottom and sides of the pool. As it moves throughout the pool, it draws the dirt and debris into a collection basket attached to the vacuum hose or to the main pump basket.

Pressure Pool Cleaners – uses pressure from the main pump OR from a dedicated booster pump to propel the cleaner. As the water pressure is returned to the pool it is moved through jets in the bottom of the cleaner and pushes dirt and debris into an attached collection bag as it moves in random patterns.

Making the choice

Suction pool cleaners are best for very clean backyard environments that won’t have a lot of larger debris entering the pool during bad weather. They do a good job picking up smaller debris and vacuuming the dirt from and scrubbing the bottom and walls of the pool. When used in pools that get a lot of larger leaves and branches, suction cleaners will often get clogged up at the mouth of the cleaner, collection basket, or at the pump basket. When this happens, not only will the cleaner stop working but the blockage can restrict a suction line to the main filter and create many different problems including water clarity issues and expensive damage to the pool pump.

If you anticipate a significant amount of larger debris finding its way into the pool, a pressure cleaner with an independent booster pump will be the best choice. They do a better job of picking up large amounts of bigger debris such as leaves and small branches. Also, as the debris gets picked up it isn’t being moved toward the main filter, reducing the occurrence of clogged baskets and circulation problems. When the collection bag gets filled up, the main filter operation will not be affected. Instead the pool cleaner will only be less efficient until the bag is emptied.

A pressure pool cleaner without a booster pump can be a good choice for pools that get larger debris, but only get a medium volume of debris throughout the year. They don’t require the additional expense of buying a booster pump, will reduce energy costs, and still can do an adequate job.

The right time to decide on the type of cleaner for your new pool is during the design phase of the swimming pool. Work with your builder and have a conversation about the issues discussed above. Don’t let them just sell you the cleaner that makes them the most money. They should be helping you choose the right automatic pool cleaner based on your backyard environment and how it will affect your pool maintenance needs.

Your Handy Checklist for Winterizing a Pool

For those of us in the northeast, the summer season seems to fly by. As the days start getting shorter and the temperatures start dropping, pool owners are forced to start thinking about the inevitable pool closing.

Filters, pipes, heaters and pumps-they’re all made of durable materials, but when they’re exposed to colder temperatures and ice, they run the risk of cracking. Unless you take the proper precautions for winterizing a pool, you can do serious damage to this important investment-and ruin next year’s swimming enjoyment at the same time!

Start Planning Your Pool Closing Today

While all pools are slightly different in their setup, you can use these simple tips if you’re just learning how to winterize a pool.

Balance your pool water.

When it comes to pool closing, chemicals and pool closing supplies need to be dealt with first. You’ll want to adjust your pH, total alkalinity and calcium hardness levels several days to a week before to your pool closing so that you have the time to adjust them if necessary. About one week prior to pool closing, you should shock your pool with granular chlorine to allow the chlorine level to drop before placing the pool cover. Remember, high levels of chlorine can weaken a pool cover, so don’t allow the highly chlorinated pool water to come in contact with it.

Thoroughly clean the pool.

The cleaner your pool is when you cover it, the better it will look next year. In your arsenal of pool closing supplies, you should have pool closing chemicals, which will work on organic matter left in the pool so there’s less chance of algae growth in the winter.

Decrease the level of pool water.

Using a mesh safety cover? Take the level to 8-12″ below the tile. For solid pool covers, lower the level to 3-5″ below the tile. The lower the water, the less damage to your cover.

Introduce your winter pool chemicals.

Look into buying a pool closing chemicals kit, which typically contains algaecide, borate floaters, stain and scale, and non-chlorine shock. While the package instructions usually suggest adding the chemicals before lowering the water, you may find that adding them after boosts so the chemicals’ concentration. Spread the chemicals over your pool surface, using your pool brush to help disseminate them.

Clean the pool filter.

Cleaning the filter while winterizing a pool makes for a high-functioning pool next spring. If you use a DE filter, remove the assembly from the tank and hose it down to remove all DE powder, which can clog the fabric causing creating filtration issues next year. For cartridge filters, the same rule applies, remove the cartridge and hose very thoroughly. After blowing the lines, place the filter cartridge or grid assembly back in the tank for protection during the winter. Secure your filter lid and clamp band before and after blowing lines.

Remove your drain plugs.

Examine your pipes, pump(s), filter, heater and chlorinators, and remove any drain plugs. Open all directional valves to allow water to meet the water in the pool.

Blow out the lines.

The most important step for how to winterize a pool, you must ensure there is no water left in the equipment or plumbing. Blow out the lines with a powerful shop vac or a small air compressor. If you don’t feel confident with this step, make completely drain all equipment and add non-toxic pool antifreeze to the plumbing lines to prevent freeze damage.

Plug your lines.

Once you’ve blown out the lines while winterizing a pool, use expansion plugs or freeze plugs to plug returns, skimmers and cleaner lines.

Turn off the circuit breaker.

To shut off power to the pump, turn off the circuit breaker. This is also the time to turn off any timer dogs on the time clock, in the event that the breaker gets turned on accidentally during the winter.

Remember, you don’t have to go it alone when winterizing a pool. If you have any questions about pool closing chemicals, pool closing supplies or the process in general, contact your local pool professionals. They’re experts at it!

Balancing Swimming pool Chemicals: Keeping Your Chlorine Pool's Water Chemistry in Balance

There are 5 major aspects to balancing swimming pool chemicals in a chlorine pool. These 5 aspects are key to keeping your chlorine swimming pool water chemistry in balance, and should be checked on a weekly basis to help reduce the chance of unwanted algae and bacteria from growing. Algae and bacteria will cause a pool to turn green, attract mosquitoes and other bugs and make a pool less healthy or even dangerous to swim in. Here is a breakdown of the important things to look at to ensure a clean safe pool to swim in.

1) Water Hardness Level

Water hardness level is the first key to balancing swimming pool chemicals, and consists of two components: Direct Hardness Level and Indirect Hardness Level.

Direct Hardness Level – Hardness in your water is direct result of the source your water comes from. When the water hardness is too high, it makes balancing swimming pool chemicals difficult. The biggest things that make water hard are dirt and partials (Magnesium and calcium from the dirt and atmosphere to be exact) that are in your water when it arrives at your house from wherever it came from. If you get your water from a well it will have a different hardness level than if you get it from the city you live in. Some communities have harder water than others. It all depends on the source.

Indirect Hardness Level – Hardness in a pool is indirectly affected by the various chemical compounds that dissolve in your pool’s water. As you add chemicals to your pool and they do their job, they get used up and start to add to the harness level of your pool’s water chemistry.

When water gets too hard it has no room to let the chemicals that balance a pool to dissolve and work, and it has a tendency to start creating deposits or minerals on your pool’s floor and walls and pool equipment due to the high concentration of the minerals in the water. When water hardness is to low (this is not the case too often) water is corrosive and will start eating away at your surfaces. In this case you can add a chemical called Calcium Chloride to bring the harness level up.

Perfect water hardness levels should be between 200-400 ppm of minerals to be safe and effective. If water in your pool becomes too hard the only way to resolve it is to drain your pool partially or completely, and refill it with new fresh water.

2) Chlorine Level

The chlorine level in the pool is the second key to balancing swimming pool chemicals. When talking about sanitizing a chlorine pool and killing unwanted algae and bacteria, chlorine is the most important chemical to have. It is important to keep this chemical in balance though, because if you have too much it can irritate swimmers’ skin and eyes and be unhealthy, and if you have too little then algae and bacteria can grow.

There are two forms chlorine takes when it is in your pool. I call the two forms “Useable Chlorine” and “Used Chlorine”. Combined (Useable and Used) make up the “Total Chlorine” in your pool.

1) Useable Chlorine (AKA Free Chlorine) is the chlorine that is actively working, sanitizing and killing unwanted algae and bacteria in your pool. This useable, or free chlorine level, is the most important chemical to keep in balance. The minimum useable chlorine there should be in your pool is 1 ppm. Less than this and there will not be enough to sanitize and kill. The most useable chlorine there should be in your pool is 10 ppm. More than this, and it becomes irritating and unsafe to swim in. The ideal range for perfect pool chemistry is to have 1-3 ppm of free, useable chlorine in your pool.

2) Used Chlorine is the chlorine in your pool that has already done its job and is now ineffective. It is the part of the chlorine that is just floating around adding to the hardness of your water and it is not killing anything. Sometimes when people check chlorine levels in pools, they see that there is a good amount of “Total Chlorine”, but that does not ensure that there is enough useable chlorine killing things because the used chlorine is done and used up.

This is where “Shocking” a pool comes into play. Shock is an extra large dose of useable or free chlorine and when a pool is shocked the useable chlorine sanitized, kills and burns off the used chlorine. This helps give room in the hardness level of the pool for the useable chlorine to move around and do its job in keeping your pool clean and safe.

3) PH Balance

PH balance is the third key to balancing swimming pool chemicals. PH is the index to show how acidic or alkaline (basic) pool water is. The ideal for a swimming pool is just being on the basic side. Any PH tester has numbers that will show you how acidic or basic your water is. Water that reads lower than 7 is acidic, and water that reads higher than 7 is basic. The perfect range for swimming is between 7. 2 and 7. 8.

Low PH – If a pool is too acidic or has a low PH then the water can corrode fixtures or equipment or the surface of your pool. This also causes chlorine to be killed off and stops its effectiveness. If the PH is too low swimmers’ skin and eyes can become irritated as well. If the PH level is too low, Sodium Bicarbonate (Soda Ash) needs to be added to your pool.

High PH – If a pool is too basic or has a high PH, then the water can also be uncomfortable to swim in, and the water can become cloudy. A High PH can also cause calcium and metals to come out of your pool surface and create stains and deposits on pool equipment and walls. Muriatic Acid is the chemical that is added to a pool to lower the PH level if it becomes too basic.

4) Conditioner Level

Conditioner level is the fourth key to balancing swimming pool chemicals. Cyanuric Acid (“Stabilizer” or “Conditioner”) is the chemical that is added to a pool to stabilize the chlorine balance. Chlorine is affected and dissolved fast by the ultraviolet rays of the sun. Cyanuric Acid protects chlorine from the sun. When a pool is filled, Cyanuric Acid needs to always be added first so that the chlorine can do its job. Also, as evaporation happens or a pool is partially drained and refilled, cyanuric acid also needs to be added. The ideal level of cyanuric acid in a pool should be between 30-80 ppm for great effectiveness so that the chlorine is not harmed by the sun. If the level of cynanuric acid ever reads higher than 100 ppm, then it should be lowered. In such a situation, the only way to lower it is to partially drain the pool and add fresh water.

5) Total Alkalinity (TA) Balance

Total Alkalinity is the fifth key to balancing swimming pool chemicals. The total Alkalinity, or TA, is the measurement of how much alkaline substances are in your pool’s water. When checking your pool TA level it should read between 80-120 ppm. When the TA is in this range, it helps stabilize your PH level and prevents rapid PH changes. If your TA level is to low, metals start to corrode, your pool walls and floor become etched and stained, the PH level bounces up and down and water can become green from algae growth. If your TA level is too high your water can become cloudy, the PH level will be hard to keep balanced, chlorine will not be as effective and your pool will constantly need more acid.

If you need to raise the level of your TA, add sodium bicarbonate (Soda Ash) to your pool. It is the only chemical that will raise the level of your TA without drastically changing the PH level. If you need to lower the TA level in your pool, add Muriatic acid.

In conclusion, the key to balancing swimming pool chemicals is checking their levels regularly and adjusting them as needed. If you or the company you hire to maintain your pool keeps an eye on these 5 things you will always have a clean, safe and enjoyable pool to swim in all year long.

Six Deadly Pool Purchasing Mistakes and How to avoid Them

The six deadly pool purchasing mistakes are frequently made as a result of simply not being informed and knowing what questions to ask. Avoiding these mistakes could save you thousands of dollars and hours of heartache and frustration.

So you want to buy a pool but don’t know where to start? Perhaps knowing the common mistakes people make when purchasing a pool will help you start off on the right foot. Everyday, people get “duped” into buying the wrong pool, the wrong way, with no recourse or protection. These same people wind up being dissatisfied and even angry because their expectations weren’t met.

Throughout my long career in the pool industry, I have met many people who have made serious mistakes when they purchased their pool. Every year it seems as though I hear the same stories over and over. As a result of talking with scores of pool owners and through my own years of experience in the industry, I have concluded that there are six common mistakes that people make when purchasing a pool.

The solution to Avoiding the
Six Deadly Pool Purchasing Mistakes is…
Ask the right questions! It’s simple. If you ask the right questions, you’ll uncover 90 percent of the potential problems that most pool purchasers commonly face. There’s always that 10 percent chance that something will happen that you couldn’t have foreseen; but, for the most part, you’ll be able to avoid almost any surprise.

However, if you’re like most other pool purchasers, you know so little about pools or pool construction that you don’t even know what questions to ask. That is why I wrote this special report just for you. After reading this report, you will be one of those few pool purchasers who “know what they’re talking about. ”
The first questions you need to ask yourself when thinking about buying a pool are:

1. Why do i want a pool?
2. What will my family and I use the pool for?
3. Who is going to maintain the pool?

Why are these questions so important? Before you can decide “what” type of pool you want, you need to understand “why” you want a pool. Is it for family recreation, entertaining guests, physical therapy, exercise, personal recreation or just to “keep up with the Jones’? ”

Knowing the answer to these questions will help you avoid the first deadly pool purchasing mistake, which is…

Mistake #1:
Not Designing Your Pool for its Intended Purpose
You might have heard the phrase, “Form follows function. ” To know what type of pool you want, you need to know what you’ll be using it for. The type of pool you’ll select should depend on what you’ll be using it for.

More often than not, people considering the purchase of a pool have a specific purpose in mind. It is important to write this down and have it ready when you start to talk to pool builders.
For instance, if you are going to use your pool mostly for family entertainment, then you will want to include safety features such as gating or fencing that will control access to the pool. If your primary use is for entertainment, then you may consider mood lighting features with special landscaping features, such as waterfall features in and around the pool. If you want to build a pool for physical therapy or exercise, you might include a longer shallow area for swimming or perhaps built in spa jets in the seat, pull up bars, or even a smaller pool with swim jets.
The Myth of the Large Pool
An interesting phenomenon frequently happens when the majority of first-time pool buyers desire a large pool with a deep end and a diving board. After about a year of pool use, new owners discover that the deep end rarely gets used and the diving board becomes more of a safety hazard. Most of the games that are pla
yed by the kids are done in the shallow end and that’s where the adults spend 95 percent of their time. Because they decided to build a large pool with a deep end, only 35 percent of the pool gets utilized, resulting in unnecessary expense and low usage. It’s also important to consult with your insurance agent regarding increased premiums with diving boards.

Fencing is always an important element of your pool, not only for child safety but to provide a certain level of privacy. You may consider a retaining wall if your yard is on a slope so that you can step down to the pool, providing you more privacy. Many pool builders will try to talk you into elevating the level of your pool if your yard has a slope. Simply because there’s less dirt to remove, builders can cut trucking expenses. This can leave you with an inground pool that has an above ground look.

You should also have an understanding or vision of what you want your entire backyard to look like, not just your pool. Your pool should compliment your existing backyard and integrate with your intended landscaping goals, both now and in the future.

Here are some other points to consider when designing your pool:

1. Access – Ensure there is easy access to your pool from your house, restroom or entertainment area. You might want to consider how patios, decks or walkways are positioned to provide a safe and simple entrance and exit between your home and your pool.

2. Lines and Cables – Before settling on a location, you need to ensure that there are no electrical or telephone wires, sewer or septic lines or buried pipes.

3. Drainage – Water needs to drain away from the pool to avoid standing water or dirt and mud getting into the pool. This is especially important if you’re in a location that has a history of flooding.

4. Add-Ons – If you plan to install a diving board, spa, slide or waterfall, make sure that you plan for adequate deck space for each add-on.

5. Sheds – A common method of protecting equipment is to build an equipment shed close to the pool.

6. Sun vs Shade – The sun can help to keep your pool water warm; however, placing your pool under trees can result in a lot of extra maintenance.

7. Covenants – Find out if there are any subdivision covenants regarding the construction of pools.

To obtain a building permit, it is generally required to get a survey or plot plan of your entire property. In fact, you should already have one from when you bought your home. The survey will help you to decide where to locate your pool and any other accessories.

Make sure you schedule an initial on-site consultation so that your pools primary functions and activities are reflected in the design. Furthermore, an on-site consultation should urge you to consider the overall vision of what you want your backyard.

Mistake #2
Choosing the wrong Pool “Container”

There are three basic types of in-ground pools: concrete/gunite, fiberglass, and vinyl liner.

No matter what type of pool you choose, you will be required to perform a certain amount of maintenance. However, each type of pool provides its own maintenance challenges. It’s important to understand these challenges by pool type before you make your selection.

Concrete/Gunite Pools
Concrete and gunite (a type of reinforced concrete) are the most common in-ground pool types because they have been on the market longer than the new, more efficient types of pools.

Concrete and gunite are sprayed over a framework of steel rods and wire mesh, then coated with plaster to give the pool a smooth, printable surface. Today, concrete and gunite pools are most commonly used for commercial and public swimming pools.

The nice thing about concrete and gunite pools is that you can virtually build them in any shape or form that you wish. Unfortunately, it is the most expensive of the three types of pools and it takes a long time to build.

Furthermore, concrete and gunite is porous, therefore providing small areas for algae and bacteria to grow. In addition, it can easily crack and chip with the change of the temperature and weather conditions, providing even more areas for algae and bacteria to grow. This is why concrete and gunite pools require the most maintenance of the three types of pools, costing $100 or more a month to maintain. It is also rough on the kids feet, and because kids will stay in the pool for extended length’s of time makes this extremely damaging to the skin.

Concrete and gunite pools require periodic annual or semi annual pool draining for cleaning purposes. When the pool is drained, the cracks in the concrete and gunite need to be repaired and the pool siding acid-washed and perhaps re plastered, if necessary. Acid washing is necessary every one to three years, depending on water condition. Acid washing does remove a layer of plaster or mar cite. Usually, after the second acid wash you can expect to re plaster the pool.

Vinyl Liner Pools
Vinyl liner pools use a high-density vinyl lining, offering a cosmetic textured pool surface. The lining is “seamed” together throughout the sides of the pool. Polymer or steel walls are bolted and fastened together on concrete flooring. The vinyl liner is spread over the floor and paneled walls and connected to the top of the walls by a vinyl rib at the outside edge of the liner.

The upfront cost of vinyl lined pools can be inexpensive when compared with concrete and gunite pools and take much less time to install. However, the maintenance on vinyl lined pools is high because the liner can be easily scratched or cut, especially if there will be toys or hard objects in the pool (even mechanical pool cleaners! )#). To repair a vinyl lined pool, you’ll need to replace the entire lining, which can cost from $1, 500 to $3, 900 or more depending on the time of the season for replacement.

Also, algae and bacteria tend to nest in the porous texture of the fabric and seams of the vinyl, requiring high amounts of chlorine to keep the pool clean. It’s kind of like a shower curtain that is exposed to moisture and heat on a consistent basis.

Severe problems can arise when algae starts to grow under a vinyl liner because it can start to eat the liner from the underside and is very difficult to treat. You can expect to pay up to $100 or more a month to maintain a vinyl liner pool.

In addition, heating costs will generally be higher, especially on steel wall construction. The only thing between the ground temperature of 57 degrees and the pool water is steel and vinyl. A polymer or plastic wall does reduce the cost of heating somewhat; but, it also adds considerable cost to the construction of the pool ($1, 500 to $2, 500 in some cases).

Fiberglass Pools
Fiberglass pools are made out of a seamless one-piece, pre-formed fiberglass container that is set in the ground and can be installed in less than five days. The fiberglass itself has a smooth, non-porous gel coat surface.

Although fiberglass pools have a wide range of sizes and shapes, and can be moved if you choose, you are restricted to those sizes and shapes that are offered, unlike a concrete or gunite pool. You’ll rarely find a fiberglass pool over sixteen feet in width because the come from the factory ready to install in one piece.

Fiberglass pools are appealing because they require much less maintenance than either of the other pool types. Fiberglass will not rip, tear, crack, chip or leak, providing a longer-lasting surface. Therefore, monthly maintenance costs are minimal. The durability of fiberglass is especially important if you live in a cold weather climate, or unstable soil, in which surface materials contract and expand. This is why concrete and gunite pools crack and chip.

Because a fiberglass is non-porous, algae and bacteria cannot stick to the surface. This reduces the amount of chlorine necessary to keep the pool clean to about one-fourth of the amount that other pools use, which can add up to large cost savings over time.

Fiberglass pools never require draining for cleaning, which is a huge chore. In addition, to clean the fiberglass surface, all you need to do is vacuum the bottom of the pool, which takes only 10-15 minutes a week. At first you might think that concrete/gunite pools are the most stable; however, fiberglass pools can flex about two feet without sustaining any damage and can safely withstand more external pressure than concrete/gunite pools.

However, there are huge distinctions between different fiberglass pools. (They are not all created equal. )#) Vinyl Ester resin is a must! This material is a bonding agent that helps hold the pool together. Vinyl Ester also prevents cobalting, which is a black or purple stain that forms from the outside in. It is a chemical reaction within the fiberglass itself. The stain can usually be removed but will continue to resurface. Make sure you see it in writing that the pool has Vinyl Ester. If it’s not advertised in print, chances are it doesn’t have it.

It’s also important to have some sort of vapor barrier in the fiberglass. Even though the gel coat or finish is smooth and non-porous, the back of the pool is without a vapor barrier. Fiberglass is a cloth that will absorb moisture from the ground. Moisture or even ground water will leach through the fiberglass causing blistering on the gel coat that is not usually covered by warranty.

You also want to make certain the pool is constructed with hand laid fiberglass as opposed to chopped glass. Hand laid fiberglass is much stronger and is built with full sheets of fiberglass cloth. Chopped glass fiberglass is a pudding-like substance with shreds of fiberglass usually sprayed or rolled on. Fortunately, because fiberglass pools are pre-built, you can see the pool prior to installation. Check out the finish beforehand. If it doesn’t look good out of the ground it won’t look good in the ground. Remember, water magnifies any flaws.

The technology in this industry is changing and evolving almost monthly, with recent introductions like the infusion of Carbon Fiber which adds extreme strength, and some pretty nice looking colors, this makes this worth a closer look than in the past.

Mistake #3
Choosing the wrong Developer
The worst mistake that a person buying a pool can do is choose the wrong developer to build the pool. There are many “fly-by-night” pool developers that use temporary workers to install pools,. Other developers employ installers (or subcontractors) that have virtually no experience with pool installation.

Pool developers consistently experience a high turnover with their staff so it’s a constant struggle to keep good, experienced people who have installed a lot of pools. There are also a lot of developers who will sell you a pool with no regard for how it will be integrated with your landscape and lifestyle.

Make sure the developer has a firm brick and mortar location and is not working out of his garage. Also, do not purchase a pool from the internet. Take time to visit the location.

After narrowing it down to the top two or three builders, invest in the time to visit their location to look at their products and services. See how their staff treats you. (Remember, people who feel good about themselves produce good results).

This is the biggest investment of your life next to your home. Invest your time. Take the family on a fun day out to look at pools and builders. Stop for lunch. Slow down, take your time. Feel comfortable and investigate.

The following are several questions you can ask potential pool developers when you request a proposal or bid to build your pool.

1. Do you offer the type of pool container that i want (fiberglass, concrete/gunite, vinyl liner) and how much experience do you have with installing that type of pool?
Most pool builders specialize in one of the three types of pools. A builder that is an expert in installing concrete pools may not necessarily be an expert in installing fiberglass pools. Find out how many of the same type of pools the builder has installed. If you are having accessories such as a deck, spa or landscaping done with the same builder, make sure that they have done that type of work in the past with other clients.

2. What is the average experience of your installation staff or do you subcontract out the construction? Do you hire only licensed and bonded sub-contractors?
It isn’t uncommon to find a pool builder that uses subcontractors for the entire installation process. In this case, you need to consider the experience level of the subcontractors. A pool builder is only as good as the people doing the installation work. Preferably the builder will have his own staff, resulting in better quality control. However, if a subcontractor is used, make sure that they are licensed and bonded to protect you if things go wrong.

3. Are you certified by the National Spa and Pool Institute? What other trade organizations do you belong to?
The National Spa and Pool Institute (NSPI) is the association that supports the spa and pool industry. The NSPI has a “Certified Builder”course that teaches builders how to build high-quality pools using the latest techniques that meet specifications. Having the certification means that the builder has at least met some standard education requirements to do the job right and it shows the builder’s commitment to quality. This one question can weed out a fly-by-night builder from a reputable builder. If the builder belongs to the Better Business Bureau, a Chamber of Commerce, or even a Rotary Club, it demonstrates that the builder intends to be around for a long while.

4. Do you provide financing for the pool construction project?
Even if you have the money sitting in the bank or you plan to get it from a commercial lender, asking this question may result in some revealing information. If a builder provides financing, it means that they have been around long enough to build credit and a good reputation with the banks. It is advantageous to have options for financing the construction of your pool. Another benefit of financing your pool is that in-ground pool construction is considered a home improvement and the interest payment on your loan is tax deductible.

5. Can i speak with several of your past customers?
This is the killer question. The proof is in the pudding and if you can’t speak to a previous customer, it probably means that they don’t have one or that they are disgruntled. Run from a builder that can’t provide you with testimonials from prior satisfied customers.

The real test is talking to those customers yourself. Ask the builder if you can pick one or two from a list of 10 previous customers. This will ensure that you’ll be choosing a non-biased customer. Ask the customer, “I know that the builder does great work but all jobs have at least one or two things that didn’t go as planned. Can you tell me what were some things that didn’t meet your expectations? ” This question will get the customer off the fence.

6. To what extent is the owner involved in the daily operations of the business?
If the owner of the business isn’t 100 percent involved in the business, it doesn’t mean that you write them off but you should find out how the business is being managed. Quality usually has a direct correlation to the level of involvement by the owner of the business.

7. Can the builder present a certificate of insurance to prove that they are fully insured?
Ask the builder about any liability and compensation insurance he may carry to protect you in the event of an accident during the construction of the pool. There’s nothing worse than getting into a situation in which things didn’t go as planned and not having recourse for receiving compensation because of damages. Every reputable builder should be fully insured. Period.

If you ask and don’t receive a copy of worker’s compensation and liability insurance, don’t use the builder. You may even go as far as to call the agent listed to verify that their insurance is in force. Finally, remember worker’s compensation protects people. Liability protects property. You need to have both.

Other things you might consider are the builder’s credit rating and you may want to check county records for lawsuits.

8. Does the builder offer in-home design services?
Many good builders will offer in-home design services that will not only save you money but also demonstrate the builder’s experience and expertise.

9. If there is damage to my yard or landscaping, will you repair it?
It is imperative that you set your expectations up front during the interview process with the builder, especially when it comes to damage. Many pool buyers are surprised when they see the amount of damage to their yard that takes place during a pool installation.

However, there is such a thing as excess damage due to negligence on the part of the builder. Make sure you address this right up front and that it gets into your contract. Some pool builders aren’t willing to take on the risk of paying for yard damage.

10. What are the electrical and plumbing requirements and who will perform them?
Your pool builder should know about existing electrical, plumbing, zoning, building and grading requirements. It’s important to test the knowledge of your builder. Even if you don’t know the answers yourself, you’ll have an idea whether they have a good grasp on the requirements.

By the way, never allow a pool builder to force you to take a permit out in your name. It should always be in the builder’s…

11. What type of maintenance training will i receive upon completion of the pool?
Upon completion of pool installation, your pool builder should provide you with training, including: equipment maintenance training; chemical and cleaning training; winterizing training; and safety training. These topics will be crucial to the longevity of your pool.

12. How long will the construction take and when can you start?
Even if a pool builder is good and you feel comfortable with their skills and ability, their schedule needs to sync with your schedule. A good pool builder will most likely be booked, so you may want to start the search process early in the season or reset your expectations as to when the pool can be installed.

Never choose a pool or a builder based strictly on schedule. Make your choice on the quality of both the product and the builder. A high-quality builder will never sacrifice quality for speed. Remember, if you are a first time pool buyer, another couple of months won’t hurt you. Stay focused on quality.

13. What is the cost and how much do you require as a deposit?
Ultimately, your pool needs to fit your budget. You should ask for a proposal only from builders that you feel comfortable with and meet your minimum requirements. Although it varies from builder to builder, 2 percent to 5 percent down is an acceptable amount to ask as a deposit. If a builder asks for an amount greater than 10 percent down, it’s time to end the interview. Also, make sure you examine the down payment schedule and make sure the builder explains it to you.

Good References are important

Overall, asking this series of questions will help you get a feel for who may be the best choice to build your pool. Remember, good references are important because they are based on past experience rather than a right answer to an interview question. Call local building departments, call the state, and call the Better business bureau. A good builder’s reputation will precede them.

Mistake #4
Not Getting a Full Understanding of Your Pool Contract and Warranty
It is certainly a deadly mistake not getting a full understanding of your pool contract and warranty. As Ross Perot once said, “The devil is in the details. ” Pool contracts and warranties can be deceptive if they are not read carefully and if you don’t ask enough questions.

Parts of a pool usually included in the warranty are:

1. Structural – Structural integrity of walls, reinforcements and concrete.

2. Equipment – Equipment such as filters, skimmers, pumps and heaters.

3. Plumbing – Materials and workmanship on electrical, gas, piping and pool plumbing.

Generally speaking, most pool buyers get surprised when something goes wrong because they didn’t take the time to understand the details of what is included in the warranty and more importantly, what is not included in the warranty. Try to make sure your pump, filter and heater are from the same manufacturer. That way you have one warranty that covers your main equipment. Plus, most pool companies will not stock repair parts from multiple manufacturers. Things like discoloration in fiberglass and vinyl liner pools are usually not covered because the color of the walls have a lot to do with how you’ve maintained the pool and the chemical balance of the pool water. Chipped concrete or gunite are not usually warranted because that’s the nature of concrete when exposed to the elements.

When purchasing a vinyl liner pool, you need to be cautious about what’s included in the warranty for the liner. Is it just the seams or is it the entire liner? Most vinyl liner pool builders stress the warranty on the seam, but the seam never goes bad. What frequently goes bad is the vinyl lining, not the structural walls or the seam.

Who’s Warranting What?
Understand who warranties what. For instance, who warranties the pump and filter? The manufacturer or the dealer? Who do you contact to report problems? Do they have a toll-free number? Who comes out to fix the problem? In some cases, each individual manufacturer will warranty each separate piece of equipment and will have different service providers fixing the problem. There’s rarely a one-stop solution for pool warranties and service.

Read the warranty carefully with the builder and ask questions. Ask what is not warranted and why. After you’ve seen a couple of warranties side by side, the questions will become much easier.

Mistake #5
Focusing on Upfront Cost Rather than Cost of Ownership
Because in-ground pools can cost up to $40, 000 and more, most pool buyers are concerned about the upfront price and pay little attention to daily operational costs. Purchasing a pool that requires little maintenance will usually be the cheapest deal in the long run. Pools that don’t require a lot of chemicals, cleaning, resurfacing or replacement parts will cost less over the life of the pool.

Additional Costs

Additional costs of required basic equipment can surprise some pool buyers. Equipment such as filter systems, steps or ladders, and skimmers for surface cleaning are considered essential.

Many pool owners install heating equipment and pool-side decking of concrete or wood. Pool covers are often used to keep water clean and retain heat when the pool is not in use. If used properly, these covers can be a wise energy-saving investment.

Mistake #6
Falling for Slimy Sales Gimmicks
Once you have decided to build a swimming pool, there is a natural excitement and eagerness to have it installed as soon as possible. This is often the point at which unwary buyers can get into hot water because dishonest salespeople and builders will be quick to take advantage of the situation.

Keep in mind that the late spring and early summer months can bring these unscrupulous people into communities where home swimming pools are popular. Attractive advertisements can turn up, offering deals that seem too good to turn down. Here are some warning signs that signal “Buyer Beware! ”

1. Salespeople who tell you an advertised pool they offer “on sale” is not worth having and then try to switch you to a more expensive model. This is called “Bait and Switch” and is a tactic that is often used in the retail world.

2. Salespeople who use the ploy of offering a reduced price on the basis your pool will be used as a model.

3. Salespeople who pressure you into signing a contract. Remember: no reputable builder and no authorized representative of a reputable builder will rush you into signing any agreement or contract at any time.

4. Never get talked into taking out the “Building Permit” yourself or in your own name. The contractor should do this. Always make sure that the contract clearly states that the pool builder is required to hire only licensed and bonded “subcontractors. ”

5. If the pool builder will not do an on-site initial visit, be alerted to the possibility of a hard sale. Chances are, the builder does not understand or care to understand your requirements.

Purchasing a pool can be a scary experience, especially for those first timers who haven’t been through the process. There are a myriad of items to consider… pool type, maintenance, warranties, contracts, liability, plumbing, landscaping, electricity, drainage, restrictions, accessories, and so on. It’s no wonder many pool buyers make mistakes that end up costing them hundreds, even thousands, of dollars.

Swimming pool Renovation Ideas – 5 Best Upgrades to consider for Your Swimming pool

Making a decision to renovate a swimming pool is not an easy task, but the recent advancement of swimming pool technology makes renovations well worth your while. Homeowners can now transform an old, troublesome pool into a luxury swimming pool, with every possible amenity, that runs smoother than it ever did. Unfortunately, many people settle for their existing pool because they do not receive adequate information regarding the possibilities of a pool renovation. Maybe they simply underestimate the transformative possibilities of renovating an existing pool. Don’t be intimidated by the task of renovating your pool with the latest industry trends.

Here are the 5 best upgrades to consider for your swimming pool renovation:

1. Salt Water Chlorinator – Swimming pool Purifier Extraordinaire

Salt Water Chlorinators represent a new wave in swimming pool service technology. Salt water chlorinators remove the need for liquid chlorine, granular chlorine, or chlorine tablets. The key here is convenience. Salt water chlorinators eliminate the storage and manual application of chlorine. When chlorine is needed, salt is converted into chlorine through a simple chemical process, the same process that is used to create these other chlorine additives. The creation of chlorine within the swimming pool itself has increased sanitizing effects due to the chemical process by which the chlorine is formed. Overall, a renovation that includes a salt water chlorinator cuts down on the hassle of adding and monitoring chlorine. These chlorinators will also prevent itchy eyes and green hair by regulating their own chlorine levels. Save your goggles for the beach. Spend more time swimming in your pool and less time taking care of it. Salt water chlorinators take complete responsibility for your pool.

2. Color LED and Fiber Optic Pool Lights – Swimming pools That Shed light on Backyard Nightlife

One renovation that would significantly upgrade your pool’s visual effects is the addition of color LED and fiber optic lighting. This new trend of backyard night lighting is heating up swimming pools and landscapes all over the world. Color fiber optic and LED pool lights can be inserted directly into the floor or wall of a pool or spa, allowing entire bodies of water to glow in a wide array of neon colors. A well-lit pool surrounded by fiber optic spot lights can bring your pool and landscape to life. These fiber optic and LED lights increase the overall value of your pool; they enhance the functional use of an outdoor living space by encouraging homeowners to swim and entertain in their back yards well after sundown. In addition to extending the hours of swimming pool use, color LED and fiber optic lights also create dynamic backdrops to evening gatherings. Fiber optic star lights can be sprinkled along the bottom of the pool, wall of a waterfall, or inside of a grotto with astronomical effects. Dazzling visual displays can be seen as the LED and fiber optic lights shift in color and set the mood for a romantic late-night swim or a bustling backyard bash. Including fiber optics or LED lights in your pool renovations will change your nightlife.

3. Aggregate Finish Pool Plaster – A Durable Surface That Sparkles from top to bottom

Much like pool lighting, aggregate pool plaster finishes produce richly-colored pools. Pool plaster protects concrete gunite pools from damaging, but new plaster technology has developed much more aesthetically-pleasing alternatives to boring, white Marcite plaster. Aggregate finishes not only produce more durable surfaces than the outdated Marcite but they also come in a wide variety of textures and colors. As quartz, crystals, and pebbles have increased the plaster’s durability, the standard has also been raised for the overall visual appeal of pool plaster. These surfaces reflect and refract colors and light, producing exhilarating effects from the bottom of the pool all the way up to the surface. Aggregate finishes can be polished and smooth or bumpy, using pebbles, for a natural feel. Overall, renovating your swimming pool with an aggregate finish can garnish it with sparkling color and increase the life-expectancy of the finish to anywhere between 10 and 20 plus years, as opposed to Marcite which lasts no longer than 10 years.

4. Electronic Auto Fill – The Endless Water Supplier

Renovating your pool with an electronic auto fill can provide an excellent, practical addition to a swimming pool. Much like the salt water chlorinator, electronic auto fills, in general, cut down on the time you spend worrying about your pool. Water levels in pools drop every day as a result of evaporation and people coming in and out. If the water is too low, pool pumps and filters cannot function properly. Electronic auto fills monitor the water level of the swimming pool and fill the pool accordingly until it reaches its proper level. You no longer have to worry about where the water level should be, nor do you ever have to run a hose into the pool for an hour or two. Renovating with an electronic auto fill serves as yet another solution to your swimming pool concerns.

5. Natural Stone Coping and Decking – Swimming pools Decked Out in Natural Stone

Another useful swimming pool renovation is the addition of natural stone coping and decking. Stone coping and patios bring style to outdoor living spaces. A variety of stones can be used for coping and patios, such as bluestone, sandstone, and Tennessee Crab Orchard. Depending on the style of the swimming pool, various natural stones can complete the look with natural or formal tones. Contrasting materials can also be used to draw attention and frame focal points of the back yard. For instance, bluestone coping around a swimming pool with sandstone decking highlights the outline of the pool. Be sure to choose stones wisely, and keep in mind the practical needs of given spaces. Tennessee Crab Orchard pool patios, for example, stay relatively cool in the hot summer sun, keeping your bare feet from burning up as you relax around your newly renovated swimming pool. In addition, natural stone serves as a better choice than a simple paver patio; pavers usually become outdated after 5 years. Natural stone also proves to provide a better surface than stamped concrete because it is not slippery and the color does not fade.

Renovating Conclusions

Homeowners should take full advantage of their pool renovations by upgrading certain aspects of their swimming pool and outdoor living space. Visually, natural stone coping and decking, as well as color LED and fiber optic pool lights, create beautiful scenes that show off in exciting ways. On the service end, electronic auto fills and salt water chlorinators provide hassle-free solutions that keep pools crystal clear and running smoothly. Finally, aggregate plaster finishes combine practicality and beauty. Durable pool plasters protect swimming pools from damaging for 20 plus years. At the same time, aggregate finishes bring a colorful shimmer to concrete swimming pools. Don’t overlook this versatile list of exciting upgrades when considering a swimming pool renovation. Upgrade your pool with each of these up-to-date amenities and you may never have to renovate your swimming pool again.

Above Ground Swimming pools – Right Solution For any Backyard

Above ground swimming pools are a great addition to any backyard. By offering all the swimming fun and excitement of a private pool without the high cost and permanence of an in-ground swimming pool, above ground pools are an attractive option for many families. With most above ground pools, you can start swimming soon after (and with some pools, even on the same day! )#) as installation. Some are designed to be permanent pools that you winterize for the off-season and re-open in the spring; others can be easily disassembled and stored indoors during the fall and winter months. Best of all, with a wide range of available prices, construction options, shapes and sizes there are above ground swimming pools to match any backyard, any budget.

Above ground pools are typically available in depths from 48″ to 54″. Consumers can choose from round, rectangular and oval shapes, in sizes from a simple 12′ round to a large 18′ x 39′ oval, which offer options for yards of every shape and size, as well as the ability to swim laps, play water sports and provide hours of fun & recreation for adults and kids alike. Above ground pools now come in a variety of styles, too. From traditional above ground pools, to today’s more sleek and modular designs, there’s an above ground pool to fit the decor of any backyard.

Above ground pools are made from a number of different materials, providing several construction and installation options to choose from. Traditional above ground pools such as Excalibur Pools, feature metal walls of galvanized steel that are exceptionally strong and durable. Some newer above ground pools, such as the Radiant & EZ Panel brands have energy-saving, eco-friendly properties which is making them increasing popular. Their strong metal walls feature a specially designed insulating foam core layer to retain heat and save on running costs & utilities. Their design also makes installation much more simple than traditional above ground pools, and they can be installed above ground, semi-in ground or completely in-ground – for the benefits of a traditional in-ground pool, without the high costs! A third class of above ground pools are perfect for smaller yards, smaller budgets and for families who want the flexibility to take down their pool during the off-season, or when moving. Intex pools for example offer round, rectangular and oval above ground pools in a variety of sizes, including some models made from a Super Tough® heavy-duty three ply liner, with an inflatable top ring that lets you set-up and swim in a single afternoon!

Whether the above ground swimming pool is made of metal or vinyl, assembly is usually very simple and straightforward. With metal frame pools, regardless of the specific construction design, the various pieces are fit and locked together before adding water. Traditional above ground pools such as Excalibur’s Sea Wind, Palm Bay, Glenridge, Regency and Sandstone models can usually be installed by 2-3 people in only a few hours. Newer EZ Panel, Intex and Radiant pools offer more modular construction and an even more simplified installation process. And for an Intex vinyl above ground pool with inflatable top ring, you simply fill the top ring using an electric or manual pump and fill the pool. As mentioned previously, several models of above ground pools including Radiant and EZ Panel offer a variety of installation options for fully customized results at a fraction of the cost of a traditional in ground pool. These pools are designed to be installed fully above ground, half way in ground or completely in ground.

Another great benefit of above ground swimming pools is the fact that there are now as many choices in terms of accessories and equipment as there for in ground pools. For example, consumers will find a wide range of slides, flumes, ladders & steps specifically designed for above ground pools. Most pools can also be easily adapted for decks & fencing, providing even greater flexibility in terms of design and construction.

In terms of water sanitizing programs, above ground pool owners can now heat and sanitize their pool water without needing to rely on high levels of harsh chlorine or other chemicals. For instance, mineral-based water sanitizing offers an inexpensive and easy way to purify without the need for traditional chlorine. And new saltwater sanitizing systems are now available specifically for above ground pools. These “salt-chlorine generators” use low levels of natural everyday salt to create natural chlorine, which purifies and softens pool water.

Above ground pool owners also have more options in terms of “going green” and making more eco-friendly pool heating choices that will also reduce the use of non-renewable, expensive energy sources. High-efficiency pool heaters and heat pumps can reduce energy use & running costs, and provide wonderfully warm pool water. And above ground solar heating systems can raise the temperature of pool water by 15 degrees using only the power of your pool pump and FREE heating energy from the sun. We always recommend the use of a solar pool blanket when the pool is not in use to retain heat, reduce evaporation and reduce debris. And even if you pool doesn’t feature specially-designed heat-retaining walls, wall foam (a commonly available pool product) can give every above ground pool heat-retaining properties – simply install it during pool set-up for warmer water and a longer swim season – all with lower running costs!

Consumers should always ask what’s included with the pool when considering an above ground pool purchase. For example, many above ground pools include the vinyl pool liner, but some do not. Another critical piece of equipment is the pump & filter system, which circulates & filters the water, as well as aids in purification. Some above ground pool kits such as Intex kits provide a convenient way to get all the components you need to have your pool up and running in no time. Standard above ground pool kits will typically include a pump and filter system, a maintenance kit, a ladder, a solar blanket and sanitizing chemicals. And of course, add-on accessories such as heaters, cleaners, fencing, lighting and games are always a good idea, for maximum safety, flexibility and fun.

Whether or not you decide to take advantage of the convenience of above ground pool kits, there are many advantages to enjoy when you install an above ground pool in your yard. To begin with, above ground swimming pools offer an economical way to enjoy the fun of a private pool. While prices can go as high as several thousand dollars, quality above ground pools are also available for as little as $780. Another great advantage is that these swimming pools are fast and easy to assemble, winterize and take down. With a long list of available shapes and sizes, there’s a perfect above ground swimming pool for every backyard, so every homeowner can enjoy the fun and exciting experience of having their very own private pool.

Water Conservation Using Half Pool Covers

Revolutionary Use of Half Pool Covers

Every year swimming pools are wasting billions of gallons of water that can be saved. This paper addresses the problems with the current use of full pool covers and how half covers are the solution to pool water conservation.

It is well known that pool covers can reduce water evaporation by up to 95%, yet less than 30% of pools are using covers. The current limitations imposed by full covers for the most part boils down to two problems.

The Twofold Problem

First, full covers are difficult to stock. Full covers are bulky and must be stocked in 50 or more sizes requiring a sizable amount of floor space to have covers on hand for the myriad of pool sizes. If a size goes out of stock, the customer has to wait until the warehouse reorders another truckload of covers. This distribution and stocking problem severely limits the available stock on hand at any one time and prevents the customer from being able to purchase on demand.

Second, full covers for the most part fit only rectangular shaped pools. Covers initially come off the production line as sheets in rectangular shapes and are heat seamed together for various widths. They can be further cut into oval or round sizes, but nevertheless most of the pools built today are irregular free-form shapes and custom designs. In order to accommodate free-form pool shapes the customer many times must oversize the cover which means ordering an even larger than needed cover and cookie-cutting the cover to the free-form pool using the inside of the pool cove as a guide. This however can create a lot of waste. And how do you accommodate say an L-shape pool?

The twofold solution is that by using half covers, the number of cover sizes for distribution and stocking can be reduced from over 50 to just 4 half cover sizes (see below) which can be mixed-n-matched to work with almost all pools up to L-shapes solving both of the aforementioned issues.

Encouraging the industry to distribute half covers allows more people that ever to cover their pools. This practical way of using half covers revolutionizes the way covers are stocked and distributed, never incurring oversize shipping charges, and allows dealers to have covers in stock so pool owners never go home empty handed. By solving the problems preventing all pools to use covers, in the wake of water shortages that are only getting worse, it becomes a mandate to encourage all pools to be covered.

The Added Problem with Handling Full Covers

Another overwhelming limitation to full cover usage is that historically the only device sold for handling these covers has been the deck reel, an expensive bulky towel rack like device that sits at the end of the pool consuming valuable deck space. The problem with deck reels is that even if you cookie-cut your over-sized cover to fit your free-form pool, deck reels do not handle curvy free-form pool covers very well. Also if you have limited or no deck space where are you going to put your reel?

That said, as things stand today, only pools that can accommodate a deck reel have a solution for taking the covers on and off the pool, which is much like having invented breakthrough inflatable rubber tires for the auto industry, but no jack to remove them with on 70% of the cars.

For all those millions of pools without a jack, there is an innovative half cover rolling solution that can assist in the removal and handling of covers for pools that can’t use a deck reel. Because most custom free-form pools cannot use a traditional deck reel, many of those pool owners are already splitting their bulky pool covers to make them easier to remove by hand, and are doing so at the advice of pool shops who want to sell them a cover, but cannot sell them a reel. The half cover rolling device just takes this a step further, and makes it possible for custom free-form pool owners who want to purchase a cover to have a means to handle the cover too.

The industry Change to Half Cover Distribution

As mentioned above to be expounded on here, distribution of full pool covers today is a nightmare for distributors because full cover distribution requires a multitude of covers sizes to support the many different size pools out there. Enabling custom shaped pools to use half pool covers, the plan is to revolutionize the way covers are distributed, lowering the cost for everyone and making stock on hand a top priority to solve the problem with special ordering or waiting for a cover to come in stock.

Four Sizes: Employing the revolutionary strategy to provide half pool covers will solve this problem to support the majority of pools under 20x40ft. By shifting to the four size distribution model, half cover sizes (14×14, 16×16, 18×18, 20×20) can be mixed and matched to each half of the pool. Furthermore, online internet retailers can ship the lighter more compact half cover sizes, avoiding dreaded overcharges due to weight, making shipping costs more predicable and controllable. For handling the covers, stores can provide the lightweight compact half cover roller device that currently ships coast-to-coast at a fraction of the cost of the heavier/bulkier deck reels which require two boxes. For anyone doing business over the internet, shipping lighter and more compact half covers alone is a remarkable dollar saving breakthrough.

Out of the Warehouse and Into the Stores: For retail stores, by reducing pool cover stock sizes from the multitude of covers sizes (that must be special ordered from the warehouse and delivered next day or longer if on back order) to just four sizes, covers can easily be stocked right at the store. With the new half cover distribution model, retailers can now have “stock on hand” for immediate purchase. Having stock on hand will substantially increase cover sales helping people more than ever not only have a warm pool, but most importantly conserve water and chemicals to help our environment.

Potential Market Expansion using Half Covers

Water agencies realizing the great value of pool covers to save water are beginning to offer rebates toward the purchase of a pool cover. For instance, Southern Nevada Water Authority (SNWA) offers a $50 rebate for pool covers. On the international stage the hard hit drought stricken Australia offers pool owners a $200 rebate toward a cover and roller system.

Getting the word Out: In light of the pressing need for pool covers, the greatest need is to inform everyone that the concept of using “whole pool covers” to cover the entire pool severely limits the distribution of covers, and also requires the consumer to purchase an expensive and awkward deck reel, or remove the cover by hand; emphasizing too that this solution only works on less than 30% of pools substantially limiting “use” of covers. Conversely, using the Split-Cover System, almost all pools can now use a cover, and is more cost effective for everyone resulting in higher sustainable sales for the industry overall.

A few years ago an alternative product called Sun Rings came into the market and many retail and online stores are carrying them, but a typical pool needs 10-15 rings at over $30/ea, the rings can bunch up at the end of the pool on windy days, are slow to fish out of the pool one at a time, and according to some retailers have thus experienced a higher customer return rate. On the other hand, the half cover system has a high customer satisfaction rate. It’s easy to see then that whole covers are too big, Sun Rings are too small, and half covers are just right.

Water Conservation Programs & Rebates

Current water shortages in parts of the nation, especially as mentioned in western U. S. areas like Las vegas, are requiring communities to be on year round water restrictions and may potentially drive the increased demand and expansion of the pool cover market. Programs such as Water Smart in the Las Vegas area, and Water Sense sponsored by the EPA are dedicated to conservation. Additional programs by agencies offer pool cover rebates at participating dealers.

To do it’s part in the fight for water conservation nationwide, the half pool cover distribution model will greatly assist in supplying stores everywhere with just-in-time stock on hand. In this way over time we will be helping to save billions of gallons of wasted water nationwide, by facilitating the distribution of pool covers in a much needed and better way. It takes about only 200 pools using a cover to save an entire city tank of water because a pool left unchecked for a year can completely evaporate… and that’s a lot of wasted water!

Water Loss Calculation

Let’s calculate the number of wasted tanks of drinking water through evaporation by pools.

Sacramento: Using an average evaporation rate of 17, 500 gallons/pool annually, it takes only 200 pools to waste an entire city tank of water. If Sacramento has over 50, 000 pools, then Sacramento alone wastes 250 tanks of city water every year (or) 2, 125, 000, 000 (that’s BILLION) gallons of water every year! What’s that make you think about when they start rationing water and your lawn’s going brown, while your bill’s going up?

The 17, 500 gallon/annual evaporation figure is probably conservative (other reports site 1. 5″/week). In Australia one study by Sealed Air Corporation states over 86, 000 liters per year, or over 22, 700 gallons annually evaporates from the pool. In Las vegas, the average is 100 inches per year, yet all evaporation rates vary depending on a number of conditions.

Nationwide: If the nation has around 8. 5 million inground swimming pools, then nationally we waste 42, 500 tanks of water every year. This amounts to 42, 500(tanks) x 3, 500, 000(gals) = 148, 750, 000, 000 gallons of water annually in the us alone. Again, that’s BILLIONS!

Add an additional 30% for aboveground pools to approximate another 45 billion gallons of water evaporation, and we are looking at almost 200 billions gallons of water wasted annually in the U. S. alone. Aside from the water conservation issue, think about the cost of energy used to process and create that amount of drinking water.

Worldwide: Now think worldwide and one doesn’t have to ask if this is an issue that is rife to be addressed with a sense of urgency by all parties involved.

About the Rolling Device

The key to the innovative half cover solution is the Split-Cover System that rolls half the cover at a time, so almost all pools up to L-shapes are able use a pool cover. The patented system includes two individual free-floating rollers that are fastened directly to the underside of the buoyant half covers, each roller spanning the middle of each half cover. Custom locking fasteners are used that button the rollers to the covers and are removable if you wish to detach the covers in the off season. The lightweight free-floating adjustable length rollers span across the middles of each half cover (similar to how reels are placed across the middle of a round pool) but are directly fastened to the underside of the cover. The rollers are supported entirely by the buoyancy of the cover, so nothing attaches to the pool and is completely free-floating with the cover.

To operate the system, the customer just pops on a removable crank handle to one end of the roller tube to begin the rolling process. By turning the crank, the roller pulls both ends of the cover into the middle to wrap around itself right on the water, resulting in nice compact floating roll that, once the water drains from the end, weighs less than 30 lbs (about the weight of a 3 year old), so is compact and easy to handle. When not in use the device is completely hidden so is not an eye sore to your beautiful backyard pool setting that you paid so much for.

The innovative split cover remedy in short requires no deck space, accommodates almost any shape pool up to L-shape pools, is light/compact and completely hidden, and is easy enough to roll a cover in under thirty seconds. Switching to the easier to distribute half pool covers endeavors to help the millions of custom pool owners by providing them a practical solution and a choice they never had before, and moreover, to help us all do a better job at conserving precious water.

Conservation is the Goal

In summary, the half cover distribution model will be doing it’s part to conserve water and support the cause of many water starved communities (such as Las Vegas, Australia, and others) that are water rationing and promoting pool covers through rebates so consumers will do the right thing and cover their pools. Efforts to change the way pools are covered will revolutionize the distribution and stocking of pool covers, leading the industry to change it’s distribution model which will dramatically conserve precious water. In the half cover distribution world, retailers and wholesalers will never be out of stock utilizing the revolutionary “just in time” stock on hand distribution model. Retail stores will more than ever have an incentive and the ability to stock covers at the store for immediate sale, rather than special order from the warehouse requiring customers to come back for pickup, and wholesalers will move more inventory out of the warehouse and into stores. The warehouse will benefit because they can enjoy the same profit margins, but move stock immediately out to retailers rather than waiting for truckload deliveries in their space constrained warehouses. And the customer will be able to get what they want, when they want it so that everybody wins in the never ending fight for water conservation.

How to Choose the Right Pool Service

Your pool should be kept in good shape, and there are times when you will need help in regard to that. There are times when you will need to find someone to clean your pool for you or to offer it some kind of repair assistance, and in such times you must find the right help. There are times when you will need supplies in regard to your pool, and in such times you need to know where you should turn in order to get those supplies. As someone who owns a pool, you know that you need to find the right help in regard to pool care. You need to find help in those who will treat your pool right and who will watch out for you needs in that regard. When your are seeking a pool service in Vancouver, make sure that you find the kind of service that will offer your pool good assistance. When you are looking for pool supplies in Vancouver, make sure that you know how to choose the supplies that will be good for the pool that you own. Your pool is a place where you can relax and enjoy life, and you would like to find the right help in order to keep that pool in good shape.

pool service in Vancouver

How to Find the Right Pool Service and Help: When you are seeking a pool service in Vancouver, you are looking for the kind of service that is going to help your pool stay in good shape. You want your pool to last a long time, so you need to choose a service that will be provided by those who know what they are doing. You need to find someone who understands the needs that you have in regard to your pool and who knows how to care for a pool. Look for help in someone who will watch out for your pool in a good way and provide it with quality and professional care. Knowing how to deal with a pool is important, and you must find the service that is offered through those who are ready for the job. When you are seeking pool supplies in Vancouver, make sure that you find help in those who offer supplies at a good cost. You must be able to afford the kind of supplies that you are seeking, so you must find them through a company that offers them for a low price. Look for a company that works hard to keep their prices fair. Look for help in those who will provide you with what you need for your pool at a cost that works out well for you.

There are instances when you will need help in regard to the pool that you own, and you must find the right kind of help in those situations. Look for help in those who know pools well and who will be able to provide you with good care at an affordable price. Know that you deserve great care for your pool.